Tips to avoid flat spots on car tires
Yes, parking the car for a long time can cause the car tires to experience flat spots. This happens because the part of the tire that is in direct contact with the asphalt or floor surface will continue to be under pressure from the weight of the car. As a result, the wire mesh in the car tire will change from circular to straight.
Related
- There is vibration coming from the tires
- The car feels unsteady when used
- Tires become more prone to bursting
- Suspension work is heavier so it breaks more quickly
So, in this article, Ombro will share tips and methods on how to avoid flat spots on car tires because the car has not been used for long. Check out the tips and methods below...
1. Run the car once a week
The best way to avoid flat spots on car tires is to run the car at least once a week. Try to warm up the car and change the car's parking position forward or backward so that the car tires rotate and their position is no longer the same as the previous position.
If possible, it is a good idea to drive the car out/around the complex so that the tires experience rotation and movement so that the tires flex and can maintain their round shape.
The purpose of this action is to shift the position of the car tire so that the part of the tire that is supported is not in just one spot.
2. Add air pressure before parking
A tip to avoid flat spots on other car tires is to add air pressure that is greater than the standard air pressure. Increase the air pressure by 4 psi from the normal size.
For example, the Toyota Avanza has a standard front air pressure of 34 psi and 38 psi at the rear. So, when we want to leave the car for a long time, the front tire pressure is increased to 38 psi and the rear tire pressure to 42 psi.
However, don't forget to check the tire pressure again and make adjustments according to the normal size when you want to use the car.
Adding air pressure aims to prevent the tire from getting too flat so that the surface of the tire does not become straight after being left for a long time.
3. Use nitrogen to reduce tires going flat quickly
Apart from adding air pressure, we can also fill the tires with nitrogen as a way to avoid flat spots on car tires that have been parked for too long. Nitrogen is a gas that has been filtered and does not contain water in it.
The difference in composition between regular air and nitrogen is what makes tires filled with nitrogen believed to have pressure that does not easily decrease even if the car is not used for a long period of time.
4. Support the four wheels with thick styrofoam
Apart from the method above, propping up the four wheels of the car with thick Styrofoam can also be used as a way to avoid flat spots on car tires.
Prepare 4 pieces of Styrofoam with a thickness of at least 5cm and a width slightly larger than the tread of a car tire. Place styrofoam under the tire as a replacement for the floor then add air pressure as in point number 2.
With this styrofoam, the tire tread does not rest directly on the floor but on strophoam which will keep the surface of the tire tread from becoming straight when the air pressure decreases.
5. Prop the car up with jackstands so that the wheels don't hit the floor
If you don't want to use the car for a longer period of time, supporting the car with jackstands so that the wheels don't hit the floor or road surface is the most appropriate solution to avoid flat spots on the car tires.
By supporting the car using jackstands, the wheels will not be burdened by the weight of the car. This of course will free up the entire surface of the tire so that it does not rest on the floor or road surface, thereby avoiding flat spot problems.
0 Response to "Tips to avoid flat spots on car tires"
Post a Comment